Video: Filter / Buffer products for DTV, Delay Lines, Shift Register Products
Plasma and LCD display technology and HDTV must work with multiple formats ranging from NTSC and PAL TV to HDTV formats. The digital video signal filtering requirements vary for each format to prevent "ghosting" or other unwanted artifact from displaying. NPC video filter buffer products provide a high quality adjustable filter in various configurations to match these multiple formats. NPC video delay line and video shift registers are used to adjust video signal timing to align with other video signals or system clocks.
*HDTV TV and Flat Panel Displays *Computer flat panel monitors *Video projection / DLP projectors *Video professional equipment
| Video Filter Buffers | |||||
|
Device
(Click part # for
More Detail)
|
Number of
output buffers
|
Number of
filter order
|
Supply voltage
[V]
|
Features
|
Package
|
|
3
|
5
|
4.5 to 5.5
|
Cutoff frequency variable from 5.8MHz to
37MHz: setting by VFC(voltage) or
RFC(resistance) Output buffer gain
switching function: 0/6dB 2-system input select function |
||
|
3
|
5
|
4.5 to 5.5
|
Cutoff frequency variable from 5.8MHz to
37MHz: setting by VFC(voltage) or
RFC(resistance) Output buffer gain
switching function: 0/6dB 2-system input select function Filter bypass mode(46MHz at 6dB) |
||
|
3
|
5
|
4.75 to 5.25
(analog) 3.0 to 5.5 (digital) |
I2C interface: Low pass filter
cutoff frequency linear control function.
fc=4.8MHz to 43MHz: 256 kinds of cutoff
frequency adjustable using I2C.
Filter bypass mode (80MHz min).
Clamp/bias/direct-input select function for
each input Output buffer gain switching function: 0/6dB. 2-system input select function Output sag compensation circuit built-in |
||
|
1
|
8
|
4.5 to 5.5
|
Cutoff frequency variable. fc=2MHz to
10MHz: setting by RFC(resistance) Output buffer gain switching function: 0/6/12dB |
||
|
3
|
-
|
3.0 to 5.5
|
Frequency bandwidth: 20MHz (min). Output buffer gain switching function: 0/6dB Output sag compensation circuit built-in | ||
| SM5308AS | 3 | 5 |
4.75 to 5.25 Analog 3.0 to 5.5 Digital |
Cutoff frequency variable from 5 to 44MHz in 256 steps support 480i to 1080i formats. I2C-BUS interface and slaving allow up to 3 devices on same bus. Up to two 75 OHM terminating output loads | |
| SM5308AV | 3 | 5 |
4.75 to 5.25 Analog 3.0 to 5.5 Digital |
Cutoff frequency variable from 5 to 44MHz in 256 steps support 480i to 1080i formats. . I2C-BUS interface and slaving allow up to 3 devices on same bus. Up to two 75 OHM terminating output loads |
VSOP-28 |
| SM5309A | 3 | 5 |
4.75 to 5.25 Analog 3.0 to 5.5 Digital |
Cutoff frequency variable from 4 to 40MHz in 256 steps support 480i to 1080i formats. I2C-BUS interface and slaving allow up to 3 devices on same bus. Up to 300 OHM output load resistance |
VSOP-24 |
| SM5309B | 3 | 5 |
4.75 to 5.25 Analog 3.0 to 5.5 Digital |
Cutoff frequency variable from 4 to 40MHz in 256 steps support 480i to 1080i formats. . I2C-BUS interface. Up to two 75 OHM terminating output loads |
VSOP-24 |
| SM5320 | 5 | 5 |
4.75 to 5.25 Analog 3.0 to 5.5 Digital |
Cutoff frequency variable from 4.1 to 42.7MHz by 256 steps support 480i to 1080i formats. I2C-BUS interface and slaving allow up to 3 devices on same bus. Up to 300 OHM output load resistance |
VSOP-28 |
| SM5330 | 3 | 5 |
4.75 to 5.25 Analog 3.0 to 5.5 Digital |
4- system input switching 3-channel video filter with 5th-order lowpass filter built-in. Cutoff frequency variabout from 5 to 13MHz (SD mode) or 16 to 40MHz (HD mode). I2C-BUS interface and slaving allow up to 3 devices on same bus. Up to 300 OHM output load resistance |
LQFP-44 |
| Delay Line | |||
|
Device
|
Features
|
Supply voltage [V]
|
Package
|
| SM5837A |
Variable-length 1H delay line 12-bit signal
data I/O 31 to 2078-bit delay variable range 40MHz maximum operating frequency |
4.75 to 5.25
|
LQFP-44 |
| FIFO | |||
|
Device
|
Features
|
Supply voltage [V]
|
Package
|
| SM5838A | 5120 x
8-bit synchronous FIFO.
Variable-length delay (21 to 5120 bits)
33.3MHz high-speed operation. Similar
to the list below: (pin 8 and 5 are /RE, and
RCK is disconnected) Replace: uPD42101 uPD42102 uPD42505 uPD485505 M66251 MSM514212 |
3.0 to 5.5
|
SOP-24 |
|
|
copyright 2002-2008